Marvel ML15CLP2LP Guide du propriétaire télécharger pdf (Page 28)

To Restart the Ice Machine

1. Reconnect or turn on the water supply line.

2. Reconnect drain tubing if removed.

3. Plug in the power cord to a wall outlet and turn the ice

machine on, (refer to page 14 for turning the ice ma-

chine on and off).

4. Check the water inlet, drain lines, and ttings for any

water leaks.

5. Check drain pump (if equipped) operation by pouring

approximately two (2) quarts of water into the ice stor-

age bin. The drain pump should activate and discharge

water (refer to Drain Pump on page 7). Check for

water leaks at all hose connections.

14. Remove the top clamp from the vent tube, for easier

access for the air hose.

15. Apply air pressure (approximately 10 psi) to the end of

the vent tube which will purge the remainder of the

water from the drain pump and the drain line. (See

Figure 41).

16. Reinstall the vent tube and clamp to the back of the ice

machine and remove the winterization plug from the ice

bin and save it for future use.

Figure 41

Vent

tube

Remove

clamp

screw

Drain

line

PREPARING THE ICE MACHINE FOR STORAGE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 95 96

Pas de commentaire

Marvel ML15CLP2LP Guide du propriétaire Page 28