Marvel 15AF Spécifications télécharger pdf (Page 14)

FEATURES

Probe Port (oponal) for 15AF

The oponal probe port is a hole from the inside to the outside of

the unit, which could be located on the top, side, or back of the

unit. Aer inserng your wires or probe, seal the hole ghtly with

caulk, puy, foam, etc. for proper operaon.

Product Temperature versus Air Temperature

Air temperature moves up and down with door openings and

compressor run and o cycles. Air has lile thermal mass and

therefore changes temperature relavely quickly as the unit

cycles on and o. Stored products have thermal mass so their

temperatures change much more slowly. While air temperature

may change 5 to 10 degrees C between run and o cycles, stored

product temperature typically changes less than 2 degrees C due

to their thermal mass. Always measure product temperature, not

air temperature, to determine if the products being stored are at

the proper temperature.

15AF Features

Can be installed on the counter top or built in.

Temperature range = -4°C to -20°C.

Flat door liner.

Manual defrost.

15CM Features

Can be installed on the counter top or built in.

Makes crescent shaped ice cubes.

Temperature range = -7° to -20°C.

Flat door liner.

Manual defrost

No drain required.

25CM Features

Makes crescent shaped ice cubes.

Temperature range = -7° to -20°C.

Flat door liner.

Manual defrost

No drain required.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Marvel 15AF Spécifications Page 14