
21
TROUBLESHOOTING
Problem Possible Cause Remedy
Appliance not cold
enough
(See “Adjusting the
temperature" on page
8)
• Control set too warm
• Content temperature
not stabilized.
• Excessive usage
or prolonged door
openings.
• Airow to front grille
blocked.
• Door gasket not seal-
ing properly.
• Adjust temperature colder.
Allow 24 hours for temperature
to stabilize.
• Allow temperature to stabilize
for at least 24 hours.
• Airow must not be obstructed
to front grille. See “clearances”
on page 4.
• Replace door gasket.
Appliance too cold
(See “Adjusting the
Temperature” on
page 8)
• Control set too cold
• Door gasket not seal-
ing properly.
• Adjust temperature warmer.
Allow 24 hours for temperature
to stabilize.
• Replace door gasket.
No interior light. • Failed LED light as-
sembly or light switch.
• Contact a qualied service
technician.
Light will not go out
when door is closed
• Door not activating
light switch.
• Failed light switch
• Appliance not level, level ap-
pliance, (See page 4, “leveling
legs”
• Contact a qualied service
technician.
Noise or Vibration • Appliance not level
• Fan hitting tube ob-
struction.
• Level appliance, see “Leveling
Legs” on page 4.
• Contact a qualied service
technician.
Appliance will not run. • Appliance turned off
• Power cord not
plugged in.
• No power at outlet.
• Turn appliance on. See “Start-
ing your appliance” on page 8.
• Plug in power cord.
• Check house circuit.
Commentaires sur ces manuels